<menu id="wgm60"><u id="wgm60"></u></menu>
  • <input id="wgm60"></input>
  • <menu id="wgm60"><acronym id="wgm60"></acronym></menu><menu id="wgm60"></menu>
    <input id="wgm60"></input>
  • <input id="wgm60"><u id="wgm60"></u></input>
  • <object id="wgm60"><u id="wgm60"></u></object>
  • <input id="wgm60"></input><input id="wgm60"></input>
    <input id="wgm60"><u id="wgm60"></u></input>

    General Guidelines for Successful Milling

    • Select the best grade for the application
    • Select cutter diameter 1.5 times greater than the workpiece width
    • Eliminate any overhang to increase stability
    • Choose the strongest nose radius
    • No Coolant. Use compressed air
    • Check clamp and part rigidity

    HRSA material

    Guidelines for Successful Milling

    • Down or climb milling where the chip thins upon exit is the preferred method for HNBA materials
    • Reduce feed rate 50% upon entrance and exit
    • Do not recut side walls as this can cause work hardening
    • Use balanced shell mill adapter or shrink fit for end-mills
    • As DOC gets thinner the feed must be increased to compensate for heat loss
    • Use RPG geometries if tool pressure is a problem
    • E01, E02 edge preparation recommended

    AVM series

    Features
    • High performance milling cutter line that uses round-shaped inserts for machining both aerospace and hardened steels
    • SX7, the new SiAlON grade, has the best performance for high speed machining of high temperature alloys

    HRSA materials and Hardened Materials

    <menu id="wgm60"><u id="wgm60"></u></menu>
  • <input id="wgm60"></input>
  • <menu id="wgm60"><acronym id="wgm60"></acronym></menu><menu id="wgm60"></menu>
    <input id="wgm60"></input>
  • <input id="wgm60"><u id="wgm60"></u></input>
  • <object id="wgm60"><u id="wgm60"></u></object>
  • <input id="wgm60"></input><input id="wgm60"></input>
    <input id="wgm60"><u id="wgm60"></u></input>
    下载南京麻将