<menu id="wgm60"><u id="wgm60"></u></menu>
  • <input id="wgm60"></input>
  • <menu id="wgm60"><acronym id="wgm60"></acronym></menu><menu id="wgm60"></menu>
    <input id="wgm60"></input>
  • <input id="wgm60"><u id="wgm60"></u></input>
  • <object id="wgm60"><u id="wgm60"></u></object>
  • <input id="wgm60"></input><input id="wgm60"></input>
    <input id="wgm60"><u id="wgm60"></u></input>

    NTK offers a variety of cut-off tools with as narrow a width as .020" (0.5mm)
    NTK cut-off tools are specialized for small part applications

    NTK Cut-off Tools - Product Lines

    CTP.R-SUB CTP.L-SUB
    CTP.R-SUB CTP.L-SUB
    Insert CSV CTPS CTPS-001
    Holder CSV-NC CTPS CTPSR-SUB
    CSV-NC CTPS CTPSR-SUB
    Max Cut-off Diameter ~Ø.197" (~5.0mm) ~Ø.394" (~10.0mm) ~Ø.157" (~4.0mm)
    Blade width .024" - .059" (0.6 - 1.5mm) .047" - .079" (1.2 - 2.0mm) .028" (0.7mm)
    Insert CTP
    Holder CTP CTP-OH2/OH CTPR-SUB CTPL-SUB
    CTP CTP-OH CTPR-SUB CTPL-SUB
      Coolant through    
    Max Cut-off Diameter ~Ø.472" (~12.0mm)
    Blade width .020" - .079" (0.5 - 2.0mm)
    Insert CTPA
    Holder CTPA CTPA-OH2/OH CTPAR-SUB CTPAL-SUB
    CTPA CTPA-OH CTPAR-SUB CTPAL-SUB
      Coolant through    
    Max Cut-off Diameter ~Ø.630" (~16.0mm)
    Blade width .028" - .118" (0.7 - 3.0mm)
    Insert CTPW CTDP GWPFM
    Holder CTPW CTDP CTWP
    CTPW CTDP CTWP
    Max Cut-off Diameter ~Ø.787" (~20.0mm) ~Ø1.339" (~34.0mm) ~Ø1.653" (~42.0mm)
    Blade width .098" (2.5mm) .079"?.098" (2.0?2.5mm) .118" (3.0mm)
    Insert CTV-S CTV
    Holder CTV-K2 CTVN-K2 CTV-S CTV-M (B) CTV-X
    CTV-K2 CTVN-K2 CTV-S CTV-M (B) CTV-X
    Max Cut-off Diameter ~Ø.787" (~20.0mm) ~Ø1.378" (~35.0mm) ~Ø1.772" (~45.0mm) ~1.378" (~35.0mm)
    Blade width .087" - .098" (2.2 - 2.5mm) .098"?.118" (2.5?3.0mm) .098"?.118" (2.5?3.0mm) .118" (3.0mm)

    CTP/CTPA/CTPS/CTPW selection guide : Right hand? Or Left hand?

    Right-hand recommended

    Right-hand recommended

    R-hand Toolholder using a R-hand insert with lead angle

    Left-hand recommended

    Left-hand recommended

    L-hand Toolholder with a non-lead angle insert when the bar stock is held by sub-spindle

    CTP/CTPA-SUB selection guide Right hand? Or Left hand?

    Right-hand recommended

    Right-hand recommended

    R-hand Toolholder with R-hand insert with lead angle for longer parts or small diameter part.
    When part length is too short for sub-spindle to hold, use L-hand with slower speed.

    Left-hand recommended

    Left-hand recommended

    L-hand with L-hand insert with lead angle for short part

    <menu id="wgm60"><u id="wgm60"></u></menu>
  • <input id="wgm60"></input>
  • <menu id="wgm60"><acronym id="wgm60"></acronym></menu><menu id="wgm60"></menu>
    <input id="wgm60"></input>
  • <input id="wgm60"><u id="wgm60"></u></input>
  • <object id="wgm60"><u id="wgm60"></u></object>
  • <input id="wgm60"></input><input id="wgm60"></input>
    <input id="wgm60"><u id="wgm60"></u></input>
    下载南京麻将